Raven stuck at "Connecting To V-control"

If Raven is stuck at "Connecting to V-control" 

1. Be sure V-control is open in the top right corner of the menu bar.

2. Quit V-control, Raven, and the DAW.

3. Check that the correct touch driver is installed, as RAVEN will stick if it can't connect to the touch driver. 

MTi1 connects with a DVI cable and use the MultiTouch Platform Application.

MTi2 uses the UPDD Touch Driver.

4. Restart V-control and the DAW. Then relaunch the raven software. You should now see the DAW and the Raven 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.